• EAMCET/PGECT/ICET:
  • BIET
  •   08414 252313
  •   info@biet.ac.in
1. BASIC ELECTRICAL SIMULATION LAB
 
 
Objectives

  To develop the simulation skills.

  To generate various signals and synthesis for the engineering systems.

  To analyze harmonics in the systems.

  To analyze electrical circuit in simulation environment.

Outcomes

  After going through this lab the student will be able to

  Apply signal generation in different systems.

  Analyze networks by various techniques

  Analyze circuit responses

  Analyze bridge rectifiers

Equipment Details:

   Intel®Core™i3-8100CPU@3.60GHz, 4GB RAM with 1TB Hard Disk

2. Control Systems Lab
Objectives

  To understand the different ways of system representations such as Transfer function representation and state space representations and to assess the system dynamic response

  To assess the system performance using time domain analysis and methods for improving it

  To assess the system performance using frequency domain analysis and techniques for improving the performance

  To design various controllers and compensators to improve system performance

Outcomes

  At the end of this course, students will demonstrate the ability to Understand the modeling of linear-time-invariant systems using transfer function and statespace representations.

  Understand the concept of stability and its assessment for linear-time invariant systems.

  Design simple feedback controllers

Click here to view Equipment Details
 
3. ELECTRICAL MACHINES LAB – I
Objectives

  To expose the students to the operation of DC Generator

  To expose the students to the operation of DC Motor.

  To examine the self-excitation in DC generators.

Outcomes

  After completion of this lab the student is able to Start and control the Different DC Machines.

  Assess the performance of different machines using different testing methods.

  Identify different conditions required to be satisfied for self - excitation of DC Generators.

  Separate iron losses of DC machines into different components

Click here to view Equipment Details
 
4. ELECTRICAL CIRCUITS LAB
Objectives

  To design electrical systems

  To analyze a given network by applying various Network Theorems

  To measure three phase Active and Reactive power.

  To understand the locus diagrams

Outcomes

  After Completion of this lab the student is able to Analyze complex DC and AC linear circuits

  Apply concepts of electrical circuits across engineering

  Evaluate response in a given network by using theorems

Click here to view Equipment Details
 
5. BASIC ELECTRICAL ENGINEERING LAB
Objectives

  To analyze a given network by applying various electrical laws and network theorems

  To know the response of electrical circuits for different excitations

  To calculate, measure and know the relation between basic electrical parameters.

  To analyze the performance characteristics of DC and AC electrical machines.

Outcomes

  Get an exposure to basic electrical laws.

  Understand the response of different types of electrical circuits to different excitations.

  Understand the measurement, calculation and relation between the basic electrical parameters

  Understand the basic characteristics of transformers and electrical machines.

Equipments

   Ohms Law Verification Equipment.

   KVL and KCL Trainer Kit

   RL , RC and RLC Series Circuits

   Impeadance Trainer Kit

   Resonance Trainer Kit

   DC Motors

   AC Motors

   Single Phase Transformer

6. ELECTRICAL MEASUREMENTS & INSTRUMENTATION LAB
Objectives

  To calibrate LPF Watt Meter, energy meter, P. F Meter using electro dynamo meter type instrument as the standard instrument

  To determine unknown inductance, resistance, capacitance by performing experiments on D.C Bridges & A. C Bridges

  To determine three phase active & reactive powers using single wattmeter method practically

  To determine the ratio and phase angle errors of current transformer and potential transformer

Outcomes

  After completion of this lab the student is able to to choose instruments

  Test any instrument

  Find the accuracy of any instrument by performing experiment

  Calibrate PMMC instrument using D.C potentiometer

Click here to view Equipment Details
7. ELECTRICAL WORKSHOP
Objectives

  To enhance practical knowledge related to different subjects

  To develop hardware skills such as soldering, winding etc.

  To develop debugging skills.

  To increase ability for analysis and testing of circuits.

  To give an exposure to market survey for available components

  To develop an ability for proper documentation of experimentation.

  To enhance employability of a student.

  To prepare students for working on different hardware projects.

Outcomes

  After completion of course, student will be able to

  Get practical knowledge related to electrical

  Fabricate basic electrical circuit elements/networks

  Trouble shoot the electrical circuits

  Design filter circuit for application

  Get hardware skills such as soldering, winding etc.

  Get debugging skills.

Click here to view Equipment Details
8. POWER ELECTRONICS LAB
Objectives

  Apply the concepts of power electronic converters for efficient conversion/control of power from source to load.

  Design the power converter with suitable switches meeting a specific load requirement.

Outcomes

  After completion of this course, the student is able to

  Understand the operating principles of various power electronic converters.

  Use power electronic simulation packages& hardware to develop the power converters.

  Analyze and choose the appropriate converters for various applications

Click here to view Equipment Details
9. POWER SYSTEMS LAB
Objectives

  perform testing of CT, PT's and Insulator strings

  To find sequence impedances of 3-Φ synchronous machine and Transformer

  To perform fault analysis on Transmission line models and Generators.

Outcomes

  After completion of this lab, the student will be able to Perform various load flow techniques

  Understand Different protection methods

  Analyze the experimental data and draw the conclusions.

Click here to view Equipment Details
10. Project Lab
Objectives

   Support and prepare the students to generate, develop and commercialize their own innovative ideas through entrepreneurship.

   Promote the student entrepreneurship and start-up creation at college level by improving infrastructure, entrepreneurial culture and skills

   Revise and adapt curricula to include entrepreneurial skills and problem-based learning.

System Configuration:

   Hardware Components: Intel Core i3 processor E7500, RAM:4GB with 1TB Hard Disk
Software Available: Ubuntu Opearting System, and Licensed Software Package MATLAB 2018.

11. M.Tech Lab--Power Converters and Drives Lab
Objectives

   Show awareness of the impact of power electronic control circuits on utility supply.

   To observe the difference of the conventional and power electronic control of drives.

   Have a better understanding of the close relationship between hardware and simulation models of actual systems.

   To familiarize the student with various power electronic converter topologies and their speed Control application (open loop and closed loop operation).

Outcomes:

Student will be able to

   Conduct experiments on drives for different modes of operation using different converter topologies.

   Select the suitable controller for getting the desired speed performance of drive.

   Validate the results.

Equipment Details:

   3-phase induction motor

   Single phase fully controlled converter, and many more

Click here to view Equipment Details